Forklift Repair
Starting, lifting, leaking, or travel problems. See the symptoms to describe, machine details to gather, and questions to ask before arranging work.
View repair detailsWhere We Are Based
This is home. You are the closest we get.
Edmonds Forklift Services works out of 155 East Main Street in Pamplico. If your forklift is in town or on a farm or yard nearby, you are about as close to the truck as anyone in South Carolina gets. Call 843-920-6959 with the machine and the problem.
Based at 155 East Main Street · 24/7 for emergency calls.
Pamplico, SC
Pamplico sits in southeastern Florence County along SC Highway 51, in the farmland between Florence and the Great Pee Dee River. Edmonds Forklift Services is based here, at 155 East Main Street. That is the mailing address and the home base, not a drop off counter, because this is mobile service and the truck goes to the machine.
Being local does not mean we expect you to haul a dead forklift into town. It means the drive is short. Call 843-920-6959 with the make, model, serial number, and what the machine is doing, and tell us where it is parked. If it is down and stopping work, say that first.
Most of the lift trucks around here are not in big distribution warehouses. They are behind farm shops, at grain and supply operations, in equipment yards, and at small manufacturing and building supply businesses. Machines like that often run low hours, sit through the off season, and then get asked to work hard for a few weeks straight. That pattern breaks forklifts in its own particular way, and it is the work we know best.
Local area information: Pamplico geography · Florence County
Forklift Services
General forklift repair and large marine or harbor forklift repair, done where the machine sits. Give us the model and the symptoms when you call.
Starting, lifting, leaking, or travel problems. See the symptoms to describe, machine details to gather, and questions to ask before arranging work.
View repair detailsLarge forklifts used for boat handling and harbor work. Have capacity, attachment, and yard-access details ready for the repair conversation.
View repair detailsAround Town
Pamplico is a working town, and the forklifts here earn their keep in yards and shops rather than distribution centers.
Machines that move seed, fertilizer, pallets of chemical, and equipment around a working yard. Often older, often outdoors year round, and usually needed most on the days there is no time to fix them.
Yard forklifts loading trailers and customer trucks. Rough ground, heavy square loads, and a mast that gets a hard life. Tires, chains and hydraulics take the punishment here.
Machines that live indoors on concrete and get used in short bursts. These are the ones where a battery, a fuel system, or a seat switch causes more downtime than anything mechanical.
Lifts used to move other machines and parts around. Mixed makes and models, mixed ages, and frequently a lift that came with the yard and has no paperwork at all.
Machines That Sit
Low hour machines are not low maintenance machines. Time does its own damage.
A machine parked with old gasoline or diesel in it comes back to a fuel system full of varnish and water. LP is kinder, but a tank left connected can still cause its own trouble.
A battery left flat over a slow stretch may not come back at all. On electric lifts, cells that sat discharged sulfate, and the damage is already done by the time you plug it in.
Cylinder seals dry out and weep, tires flat spot, and brake components seize. On a machine kept outdoors, moisture gets into places the daily check never reaches.
Before You Arrange the Job
Even on a call from a few minutes down the road, the same details save time. Make, model, serial number, fuel type, and the hour meter reading if you can reach it safely. Then what the machine actually does: cold or warm, loaded or empty, lifting or driving, and when it last ran right.
If the forklift has been sitting through a quiet stretch, say so, because that changes what we bring. And if somebody has already replaced a part trying to fix it, tell us what and whether the symptom changed afterward. That one answer often rules out more than anything else you could tell us.
Discuss your forkliftWhat Has Stopped Working?
These observations help start a repair conversation. They are not instructions to operate an unsafe machine or diagnose it yourself.
Tell us whether turning the key produces a click, cranking, or no response. If the engine cranks, explain whether it fires briefly or never starts. Record any display message and mention recent battery, fuel, or electrical work without assuming it explains the fault.
Describe what the operator noticed during normal work. Did lifting slow down before stopping? Does tilt still work? Mention whether it happened with empty forks or an ordinary load. Do not add a load or repeat an unsafe lift to test the machine.
Report visible oil around a hose, fitting, cylinder, or beneath the forklift. Tell us the location and whether the operator noticed a change in lift or tilt. Keep hands away from pressurized leaks and have the equipment assessed before continued use.
Say whether the problem affects forward, reverse, or both. Include whether the machine had just started or had been working for a while. Distinguish an engine that loses power from a truck that runs but does not move.
A different pedal feel, reduced stopping ability, unusually hard steering, or loose steering needs attention. Remove an unsafe forklift from service. Tell us what was observed and where the machine is parked; do not drive it around to create a demonstration.
Write down the exact fault code or message if one is displayed. Note the function being used and whether the fault is constant or intermittent. Include the model and serial number because the same-looking display can mean different things on different machines.
Stop using a forklift that cannot be operated safely. Tell us its present condition when you call.
How to Get Started
Have the make, model, serial number, and fuel type ready. For a marine forklift, include rated capacity and attachment details. Add a fleet number if the property uses several similar machines.
Use observations from the last safe operation. Tell us what the machine was doing, which functions stopped, and whether a warning appeared. Mention previous repair work and any parts already replaced.
Give the address where the forklift is parked, the gate that reaches it, and the person who can approve the job. We come to you, so the machine location is what we need, not the billing address.
A Few Straight Answers
Call 843-920-6959 and tell us what the machine is doing.
Call 843-920-6959Call before you arrange anything. 155 East Main Street is the business address, not a walk in service counter, and this is mobile service. Almost always the right answer is that we come to the machine instead.
Call and we will discuss the job. What we will not do is publish a price on a website for a repair nobody has looked at yet.
The distance is shorter, which helps. How fast we actually get there still depends on what else is down at the time. Call and we will tell you straight where you stand.
It is extremely common. Stale fuel, a flat or sulfated battery, seized brakes, and dried seals are the usual suspects on a machine that has been parked. Tell us how long it sat and how it was stored.
Yes. Find the data plate if you can reach it safely and read us what is on it. If you cannot, call anyway and describe the machine. Plenty of the lifts around here have no history with them.
Yes. Rough terrain lifts, yard machines, and forklifts that live outdoors are a normal part of the work here.
Yes. Emergency calls are answered 24/7. If the machine is down and holding up work, say so when you call.
Nearby Service Areas
Right Down The Road
Call 843-920-6959. We are based here, and we come to the machine.