01FORKLIFT REPAIR
Forklift Repair
Starting, lifting, leaking, or travel problems. See the symptoms to describe, machine details to gather, and questions to ask before arranging work.
View repair detailsNorthern Horry County
Forklift Repair in Loris, SC
Repair help for the lift you rely on.
Edmonds Forklift Services offers forklift repair in Loris, SC, including large marine and harbor forklifts. Call with the machine details and the problem. We serve your area from our base in Pamplico, SC.
Mobile service out of Pamplico, SC · 24/7 for emergency calls.
Loris, SC
Loris forklift repair without the coastal guesswork
Loris is an inland Horry County community served by US 701 and SC 9 Business, which follows Main Street. If your forklift is at a yard outside downtown, a Loris mailing address may not tell the full story. Give us the driveway, nearest cross street, and the location of the machine on the property.
Edmonds Forklift Services provides forklift repair in Loris from our base in Pamplico. Whether the machine runs every day or only when a delivery arrives, a starting, lifting, or travel problem needs a clear description. Call 843-920-6959 with what you know about the machine and when it last worked.
For a lift that has been sitting between jobs, say how long it was parked and what happened when it was next used. For a machine that failed during work, explain the last task it completed. Those are different repair conversations, even when the end result is the same: a forklift that will not move.
Local area information: Loris geography · Tabor City roads
Forklift Services
Repair help for your machine
General forklift repair and large marine or harbor forklift repair, done where the machine sits. Give us the model and the symptoms when you call.
02FORKLIFT REPAIR
Marine & Harbor Forklift Repair
Large forklifts used for boat handling and harbor work. Have capacity, attachment, and yard-access details ready for the repair conversation.
View repair detailsGetting the Location Right
Your Loris repair location
Give the address where the forklift is parked, plus the entrance that reaches it. The locations below help explain the area.
US 701 corridor
Tell us whether the equipment is on the Conway side or the Tabor City side of Loris. Include the actual street address and driveway. If your billing office is across the state line, use the machine's location for the service request.
Main Street and SC 9 Business
For a downtown or nearby commercial property, identify the receiving entrance separately from the storefront. Say whether the machine stopped indoors, outside the building, or at a loading point with limited access.
Yards outside the town center
A rural business may have several drives, sheds, or fenced areas. Provide the entrance a visitor should use and a person who can meet there. Mention any surface or clearance issue around the disabled forklift.
Loris and Tabor City jobs
We serve Loris and Tabor City, but the cities are in different states. Confirm where the forklift is today. If the machine moves between properties, do not use yesterday's job address when arranging repair.
The Work Behind the Machine
Forklifts supporting local operations
Tell us how you use the forklift. The application, attachment, and operating history help describe the repair request.
Farm and rural supply businesses
For a forklift used around feed, seed, supplies, or other palletized material, tell us what it was carrying when the fault appeared. Identify the forklift itself rather than a tractor or another machine that also has forks.
Building and material yards
If a lift has trouble after moving across the yard, describe what the operator noticed and whether the fault is constant. Tell us the tire type if known and whether lifting, steering, or travel is affected.
Small warehouses and owner-run shops
One forklift may handle every delivery. Have the owner or person approving the work involved early. A serial number and a clear description can prevent confusion when an older machine has missing decals or replaced parts.
Before You Arrange the Job
An older forklift still needs the right identification
An old machine may be known around the shop by a nickname or color. For a Loris repair request, look for the manufacturer's identification plate and record the model and serial number if they can be read safely. A shop nickname alone will not identify parts or equipment configuration.
Include any known recent work and how the forklift was behaving before it stopped. If someone has already replaced a battery or another part, mention that history. Do not buy more parts based only on a guess. Call to discuss the machine first, including whether the specific model and repair are a fit.
Discuss your forkliftWhat Has Stopped Working?
Describe the problem before buying parts
These observations help start a repair conversation. They are not instructions to operate an unsafe machine or diagnose it yourself.
No crank or no start
Tell us whether turning the key produces a click, cranking, or no response. If the engine cranks, explain whether it fires briefly or never starts. Record any display message and mention recent battery, fuel, or electrical work without assuming it explains the fault.
Slow lift or no lift
Describe what the operator noticed during normal work. Did lifting slow down before stopping? Does tilt still work? Mention whether it happened with empty forks or an ordinary load. Do not add a load or repeat an unsafe lift to test the machine.
Hydraulic leaks or mast concerns
Report visible oil around a hose, fitting, cylinder, or beneath the forklift. Tell us the location and whether the operator noticed a change in lift or tilt. Keep hands away from pressurized leaks and have the equipment assessed before continued use.
No travel or loss of drive
Say whether the problem affects forward, reverse, or both. Include whether the machine had just started or had been working for a while. Distinguish an engine that loses power from a truck that runs but does not move.
Brake or steering changes
A different pedal feel, reduced stopping ability, unusually hard steering, or loose steering needs attention. Remove an unsafe forklift from service. Tell us what was observed and where the machine is parked; do not drive it around to create a demonstration.
Warning lights and intermittent faults
Write down the exact fault code or message if one is displayed. Note the function being used and whether the fault is constant or intermittent. Include the model and serial number because the same-looking display can mean different things on different machines.
Stop using a forklift that cannot be operated safely. Tell us its present condition when you call.
How to Get Started
Three useful steps before the repair.
01 · Identify the forklift
Have the make, model, serial number, and fuel type ready. For a marine forklift, include rated capacity and attachment details. Add a fleet number if the property uses several similar machines.
02 · Describe what changed
Use observations from the last safe operation. Tell us what the machine was doing, which functions stopped, and whether a warning appeared. Mention previous repair work and any parts already replaced.
03 · Tell us where it sits
Give the address where the forklift is parked, the gate that reaches it, and the person who can approve the job. We come to you, so the machine location is what we need, not the billing address.
Do you offer forklift repair along US 701 near Loris?
Yes. Loris is in our service area. Call with the property address and say whether the forklift is toward Conway or Tabor City. The actual gate location helps when a rural address covers a large parcel.
What if the forklift is on Main Street in Loris?
Give the business name and the receiving entrance off SC 9 Business or the adjoining street. Tell us if access is behind the building and who can unlock the work area.
Can a Loris farm-supply business call about an older forklift?
Yes. Call with the make, model, and serial number if available. We can discuss the machine and the requested repair. A forklift used on agricultural property is still different from a tractor or other farm equipment.
Do you cover Tabor City as well as Loris?
Yes. Tabor City, NC is also listed in our service area. Use the correct city and state when you call. A machine parked at a North Carolina property should not be scheduled using a South Carolina office address.
Is there an Edmonds shop in Loris?
No. We are mobile, based at 155 East Main Street in Pamplico, SC. We come to your Loris yard or building and repair the machine on site. Call 843-920-6959 with the gate and the machine details.
How much will the repair cost?
The cost depends on the forklift, the fault, and the parts and labor needed. Call with the machine details and location to discuss the next step. A description over the phone is a starting point, not a complete repair diagnosis.
Do you take emergency calls after hours?
Yes. We answer emergency calls 24 hours a day, 7 days a week. How fast we get there depends on where you are and what else is down, so call and we will tell you straight. Keep an unsafe forklift out of service until it is fixed.
Nearby Service Areas
Other communities we serve
Edmonds Forklift Services
Need forklift repair in Loris?
Call with the make, model, symptoms, and the address where the forklift is located.